How to Make a Dyneema Grommet

A rope ring is called a grommet and they are incredibly useful on a sailboat! Anything you need to connect or attach can be easily setup using a grommet. Once you have a few of them you will soon find uses for them and then need even more grommets for other uses you have found around the boat!

I use this very same technique to make the deadeyes that hold up our synthetic standing rigging. This grommet, made with a Möbius Brummell Splice is incredibly strong and will stand up to whatever challenges you can throw at it!

Integral Soft Shackle on your Sheet

Having a soft shackle at the end of your line is a great asset. A soft shackle lets you securely attach a line to something without the need for a knot. This means that anyone can connect the line without you needing to check their work for a proper knot.

What could fail with a soft shackle on an eye splice? Easy: someone could drop it overboard!

The best way to make a bullet proof soft shackle is to have it permanently attached to the end of your sheet. Making the soft shackle integral to the sheet itself!

How to Install a New Halyard

Whether you are installing an additional halyard or your old halyard broke and fell out of the mast and onto your deck, you are now faced with the dilemma of “How do I install a new halyard?”

This video goes over the basics as well as a few tricks that will make installing a new halyard as easy as possible. Like most projects on a boat where you are required to go aloft, there is no “easy”, but these tips will make it “less hard”.

Dyneema Eye Splice

Eye splicing Dyneema is simple and easy to do! In the past, I have shown pictures demonstrating the various steps to accomplish this result, but now I have a video of the process!

Rope Cleaning Station

Ropes become lines the moment they enter the vicinity of a boat (unless you are the select few ropes that remain a “rope on a boat”). The trouble is, these sheets, halyards, jacklines, and other control lines all get dirty over time. Between the salt that gets into the fibers and the algae that grows on them if they don’t dry out enough, the lines become filthy!

When you remove a line from a boat and turn it back into (dirty) rope, you may want to clean it. Washing machines are not a good idea as all the agitation will form infinite knots in your ropes. Many detergents (especially fabric softeners) will actually weaken the strength of the rope. You are pretty much left with the option of a bucket filled with Dawn Soap and water.

You could simply mix the rope around in the bucket for a while and try to work the dirt out of the rope fibers the best you can, but this will end up with a dirty rope where the only thing that came out in the wash were the good intentions.

The next option is to add a brush to the equation. A good scrub brush will help loosen and remove dirt and other contaminates from the rope and its fibers, but scrubbing a rope can be rather challenging.

A friend of mine made this apparatus to facilitate the cleaning process of his jib sheets. The brushes are simply clamped to a sturdy table, allowing him to work the rope through the brushes with both hands to really clean them up well. The rope that is waiting simply soaks in the soapy water of the bucket, helping to loosen any filth that is on the line.

Photo and idea courtesy of: Scott Erwin

As the rope gets cleaner, the water can be changed out to prevent the clean rope from stewing in the old filthy water. The process really makes an impossible task much easier, and the end result is a much cleaner jib sheet once it is returned to it's home on the boat.